Many individuals assume laminate cabinets cannot be refinished, however this is much from the reality! There isn’t a need to interchange laminate cabinets because they’re old or outdated. Instead, you may simply refinish them! Immediately brighten, modernize, and alter the look of your kitchen’s laminate cabinetry all within your budget. It is important to assessment the correct process for laminate cabinet refinishing in order to achieve the best possible results. For those uncomfortable with do-it-your self handy work, there’s no need to worry; you may hire a professional contractor and still remain within funds! Proceed reading for a quick guideline to refinishing laminate kitchen cabinets, and who to call for professional common contractor work for kitchen remodeling in your town!

Laminate Kitchen Cabinets

If you are decided to refinish your kitchen laminate cabinets on your own, then good for you! Take a look on the guide under to study a number of the major parts and key points for these particular projects. You’ll want to prepare by first gathering all the necessary provides and instruments to get the job carried out right. These embrace:

Paint and Paint Primer (Water-Primarily based)

Foam Rollers

Rolling Pans

Painter’s Tape

Sandpaper (240 & one hundred fifty Grit Sheets)

Old Bed Sheets or Drop Cloths

Disinfectant Spray

Clean Rags

Microfiber Material

Everlasting Marker


For a fair more up to date look, you should buy and install new, more modern-looking cabinet handles. These are available for a variety of designs and costs at any hardware or dwelling store. If any laminate is peeling or cracking, it will have to be replaced entirely. Don’t proceed to refinish peeling or cracked laminate cabinetry. Nonetheless, if it is only slightly peeling in a single nook or so, you’ll be able to merely sand the uncovered area behind the laminate, after which re-glue it utilizing a water-proof adhesive. Use masking tape to hold it in place while it dries. This works greatest for small areas and corners. Upon getting collected all the instruments and supplies you need, you might be ready to get started.

This is how:

First clean the entire cabinets. Mud them with the microfiber fabric to remove solids, after which comply with with an intensive wipe down utilizing the disinfectant spray. This provides stronger primer adhesion and ensures a cleaner smoother finish.

Utilizing the screwdriver, remove each cabinet face and its handle while keeping track of where each goes. Use the everlasting marker to label each so you’ll keep in mind the place to switch it later.

Place the cabinet faces on the drop cloths, making certain the edges stay uncovered and accessible. Make sure the drop cloths cover enough surface space to protect the surrounding atmosphere from paint.

Use the painter’s tape to line the inside edges of the cabinet faces to prevent paint drips. Take your time on this step to ensure accuracy.

Use the 240 grit sandpaper sheets to manually sand the cabinet faces. You could choose to make use of a handheld portable sander if you are familiar with its operation. Just you should definitely not over-sand.

After sanding, use your microfiber fabric to wipe away the residual mud and sanding debris. Do this thoroughly and remove as a lot mud as possible.

Using your foam roller, apply a coat of water-based mostly paint primer to every cabinet face. Allow this to dry fully, normally 8 to 12 hours relying on the brand.

Once the primer is utilized and has dried completely, sand every cabinet face once more using the a hundred and fifty grit sandpaper. Remove extra sanding dust with your microfiber material afterwards.

Do steps 7 and eight again.

Once both coats of primer are applied and have dried, it is time to apply your water-based mostly paint of alternative utilizing your second foam roller. Make sure you use v-strokes during application to promote even paint marks and distribution.

Repeat step 10.

Permit the cabinets to dry for at the least seventy two hours earlier than reattaching hardware and reassembling them in their rightful place. This ensures that the paint has dried and hardened completely.

Not a DIY Kind of Person? No Problem!

It’s possible you’ll choose to hire a professional painting contractor instead of tackling this project on our own. In case you are not acquainted with useful work, and have never painted earlier than, it could be the wisest choice. And you’ll nonetheless stay within a cheap price range if you hire professionals for the job.

In case you have any queries relating to where and also tips on how to work with kitchen cabinet painter philadelphia, you are able to email us at our web-page.

Leave a Reply

Your email address will not be published. Required fields are marked *

Add to cart