When trying to a wonderful completed cabinet painting project, there’s some things that the do it yourself houseowner must take into consideration and properly sanding your cabinets and doors is a must to get right in the beginning. Cabinet painting is a really detailed system. Homeowners that want to take on these types of projects, will need to take the information in this article to be prepared for what it takes to turn out fantastically finished cabinets.
Painting your kitchen cabinets isn’t like painting walls or doors in your home. You could observe a system. The primary part of that system is to remove any hardware. Next is to properly clean your cabinets then fill any holes or grains that may show up in your finish product. The worst thing that may occur is doing everything right, and never filling holes or grain then you need to start all over again.
This article is about achieving a smooth finish, and that starts with sanding your cabinets. Depending on the cabinets you have whether or not oak or redwood, it’s worthwhile to pick out the correct sandpaper grit. The 2 completely different grits that houseowners must have handy are 150 grit and 220 grit sandpaper.
Going with a more coarse grit than one hundred fifty, will start to dig into your wood and those scratches will appear while you paint your cabinets and the scratches are really bad, then you will have to fill them and start the process over again. Never go beneath 150 grit sandpaper. Some people will recommend one hundred twenty grit sandpaper, but that’s incorrect and may by no means be considered in your cabinet painting project.
You will start out sanding first with one hundred fifty grit sandpaper, because that’s what’s going to penetrate the sealer or other paint which might be in your cabinets to present your primer something to bond too. When painting your cabinets, you needn’t take your sanding down to the wood. Sanding down to the wood is only needed in case you are staining your cabinets with a new shade or for a fresh look.
Most individuals think that it is advisable sand your cabinets down to the wood to paint your cabinets but that’s not true. Also, the aim of sanding your cabinets is to remove the shiny sealer which might be on your cabinets now. The glossy sealer is made to repel or create poor adhesion for grease, oil, filth as well as paint. Make positive after you are executed sanding your cabinets that they’re very dull, and free of scratches.
After you have got sanded the first degree of protection out of your cabinets, you are actually ready to remove the dust that is leftover. If there’s any mud that’s not removed, the dust once primed will give it’s own sandpaper feel and your end won’t be smooth. It is best to wipe down your cabinets with a damp rag once you think you have removed all of the sanding dust. Let the cabinets dry for a few minutes and repeat the process of wiping down your cabinets with a damp rag or towel.
Now you might be ready to prime your cabinets. After your primer has dried properly normally 4-24 hours depending on the primer you used and the manufactures recommendation. This is once you put away the 150-grit sandpaper, you do not need it anymore. Once your cabinets are primed, you have to to make use of your 220-grit sandpaper or finer. Sand the cabinets smooth because primer usually has a texture of its own. You’re going to lightly sand the primer. You are not trying to sand the cabinets hard, because you don’t want to sand away the primer and have to re-prime your cabinets spotted areas.
Repeat the dust extraction process. Use microfiber cloths to remove any mud, after that use damp rags or towels to remove any remaining dust. The following step is to paint your cabinets with the primary coat of premium paint. Let the paint dry and sand your cabinets once more between each coat of paint. You want to apply a minimal of two coats of paint.
If you liked this information and you would such as to get additional details relating to Kitchen cabinet refinishing kindly visit our website.