Many individuals assume laminate cabinets cannot be refinished, however this is far from the truth! There is no want to interchange laminate cabinets because they are old or outdated. Instead, you may simply refinish them! Immediately brighten, modernize, and alter the look of your kitchen’s laminate cabinetry all within your budget. You will need to evaluate the right process for laminate cabinet refinishing in an effort to achieve the absolute best results. For these uncomfortable with do-it-yourself helpful work, there is not any want to worry; you possibly can hire a professional contractor and nonetheless remain within budget! Continue reading for a quick guideline to refinishing laminate kitchen cabinets, and who to call for professional normal contractor work for kitchen remodeling in your town!

Laminate Kitchen Cabinets

In case you are decided to refinish your kitchen laminate cabinets in your own, then good for you! Take a look on the guide under to be taught some of the main elements and key points for these particular projects. Be sure you prepare by first gathering all the necessary supplies and tools to get the job completed right. These include:

Paint and Paint Primer (Water-Based)

Foam Rollers

Rolling Pans

Painter’s Tape

Sandpaper (240 & 150 Grit Sheets)

Old Bed Sheets or Drop Cloths

Disinfectant Spray

Clean Rags

Microfiber Cloth

Everlasting Marker


For a good more updated look, you should buy and set up new, more trendy-looking cabinet handles. These are available for a wide range of designs and costs at any hardware or house store. If any laminate is peeling or cracking, it will need to be replaced entirely. Do not proceed to refinish peeling or cracked laminate cabinetry. Nevertheless, if it is only slightly peeling in one corner or so, you can merely sand the uncovered space behind the laminate, and then re-glue it utilizing a water-proof adhesive. Use masking tape to hold it in place while it dries. This works finest for small areas and corners. Upon getting gathered all the tools and provides you want, you are ready to get started.

This is how:

First clean all of the cabinets. Mud them with the microfiber material to remove solids, after which observe with an intensive wipe down utilizing the disinfectant spray. This provides stronger primer adhesion and ensures a cleaner smoother finish.

Utilizing the screwdriver, remove each cabinet face and its handle while keeping track of where each goes. Use the permanent marker to label every one so you will remember where to switch it later.

Place the cabinet faces on the drop cloths, making sure the edges remain exposed and accessible. Make certain the drop cloths cover sufficient surface area to protect the surrounding surroundings from paint.

Use the painter’s tape to line the inside edges of the cabinet faces to stop paint drips. Take your time on this step to ensure accuracy.

Use the 240 grit sandpaper sheets to manually sand the cabinet faces. Chances are you’ll select to use a handheld portable sander if you’re acquainted with its operation. Just make sure to not over-sand.

After sanding, use your microfiber fabric to wipe away the residual mud and sanding debris. Do this completely and remove as a lot dust as possible.

Using your foam roller, apply a coat of water-based mostly paint primer to each cabinet face. Allow this to dry completely, normally eight to 12 hours depending on the brand.

As soon as the primer is applied and has dried completely, sand every cabinet face once more utilizing the a hundred and fifty grit sandpaper. Remove extra sanding mud with your microfiber material afterwards.

Do steps 7 and 8 again.

As soon as each coats of primer are applied and have dried, it is time to apply your water-based mostly paint of choice using your second foam roller. Remember to use v-strokes during application to promote even paint marks and distribution.

Repeat step 10.

Allow the cabinets to dry for at the very least seventy two hours earlier than reattaching hardware and reassembling them in their rightful place. This ensures that the paint has dried and hardened completely.

Not a DIY Kind of Person? No Problem!

Chances are you’ll select to hire a professional painting contractor instead of tackling this project on our own. If you are not familiar with handy work, and have never painted before, it could be the wisest choice. And you may still remain within a cost-effective budget once you hire professionals for the job.

If you loved this post and you would love to receive more information regarding Kitchen cabinet refinishing please visit our web site.

Leave a Reply

Your email address will not be published. Required fields are marked *

Add to cart